-
Meltblown non woven for 3-ply disposable face mask
We produce meltblown for making disposable face mask. The filtration rate can be BFE99, PFE 95, special requirement project, PFE can be up to 99%. We have attached the offical test report for the melt-blown.
넶11 2021-02-25 -
PLA non-woven fabric
Polylactic acid ( PLA) is a widely used polymer materials.It is derived from nature. Starch is extracted from plants such as corn and cassava and fermented by microorganisms to produce lactic acid.
넶29 2021-01-17 -
Raw material quantity for making KN95 /K95 mask
Pp spunbond, melt-blown, hot air cotton, earloop and nose wire are the material for making KN95 /N95 disposable protective face mask. Below is the quantity for each item to make 1 million pieces of mask
넶33 2021-01-08 -
Raw material quantity for making 3-ply disposable mask
Pp spunbond, melt-blown, earloop and nose wire are the material for making 3 ply disposable face mask. Below is the quantity for each item to make 1 million pieces of mask
넶32 2021-01-07 -
High absorbent SMPE for surgical drape reinforcement
SMPE Nonwoven fabric is made of 25% Pp spunbond and 75% Melt-blown, reinforced by heat sealing and then hydrophilic treated, finally glue coated with PE film.
넶36 2020-12-10
-
Xiamen DSY meltblown test report
Melt-blown Nonwoven 25gsm For disposable protective face mask, machine width is 160cm, 100% PP meltblown , BFE >99%.
넶27 2020-09-07 -
Microporous nonwoven test report
pp spunbond nonwoven fabric coated with brethable PE film, 58gsm. roll width 160cm, for making disposable coverall.
넶86 2020-09-06 -
ISO9001 management stystem
DSY Textile got ISO9001 certificate for both production and management system in 2019.
넶75 2020-09-05 -
PP Spunbond for mask SGS test report
Download the SGS test report here -- pp spunbond nonwoven for making mask
넶67 2020-09-05